Nature is absolutely beautiful in their favorite season, which is why every camper has a dream to enjoy it. There are some people who enjoy going outside during the summer and others who enjoy going outside during the winter. No matter what time of the year you go camping, the first thing you need to think about is the tent’s safety.
You can save your tent by using tent stakes as they provide extra protection for the tent and also provide extra support during windy conditions. For tips on choosing the best tent stakes for camping, follow the link and read the related article.
When you’ve had enough of one spot’s beauty. When you leave one spot for another, you must take the tent down. In this stage, you may run into an obstacle as you try to remove the best tent stakes. You may encounter this problem if you’re not used to removing tent stakes or if you’re unsure of the right way to do it.
Different Methods for Removing Tent Stakes
It is important to pay attention to some points when removing tent stakes to prevent those stakes from damaging the camping tent.
Affects the Ground Surface
While inserting tent stakes into the ground, you will notice that the ground is either hard or soft. You’ll have to put more force on the stakes when you insert them, so it will be harder to remove or pull the stakes up when you remove them.
It can be hard and rocky to camp on mountainside terrain, especially if you are near water. For these reasons, it is essential that you buy good and sturdy tent stakes to avoid any difficulties.
Also like this:
Using a Special Tool
Not many people enjoy doing so much manual labor after a camping trip, especially after a long day of outdoor activities. The manufacturers of tent pullers and hammers constantly improve their products to meet specific needs. A variety of tent stake pullers are available on the market. To avoid injuries, it is imperative to wear Personal Protective Equipment. Stake pullers should be connected to tent stakes via their C-shaped mouths.
Pulling mouths like this work well with double-headed stakes as well. The only thing you need to do is grip the rung between the top and the bottom. When you put the puller in a position where it’s almost vertical, it will help prevent damage to the staking. You should position both hands near the top of the puller’s handle while standing behind it. Short strokes are used to pull the top of the handle toward your chest once in this position.
With its mouth gripping the stake, the puller rotates on the rounded base. You will see the stake emerge almost vertically from the ground. Using the Redcamp Hammer and Puller to extract tent stakes is easy. No more hassles with tent stakes when you use these tools. Stake pullers like these can handle any surface, including asphalt and concrete.
Without damaging the ground or bending the stakes, they remove them right away. In spite of their heavy-gauge steel plate and tubing construction, they are lightweight and easy to handle. Stake pullers like these minimize the risk of back and shoulder injuries caused by other methods, which are common with other methods.
Using a Hammer
When tent stakes are placed on hard ground, removing them is much more difficult. An effective way to prevent back injuries is to use a hammer for difficult stakes. This Spec Ops Claw Hammer is probably already in your toolbox, but if you don’t have one, here it is. The material makes it less painful on your hands since it is tough and shock-absorbent.
Hammers are excellent tools for removing and inserting stakes. Hammerheads with hard metal heads are useful for driving stakes into the ground. There are claws on it as well, however. Stakes are extracted from the ground with claws. It is important to ensure that the extraction claw is firmly inserted into the eyelets or under the hook of the stake. Make sure you have a good grip on the hammer.
Avoid Back Injuries
In order to avoid back injuries, you should pay attention to how your body is positioned. There is no doubt that back injuries are the most common camping injuries. Most often, tent stakes pull from the ground as a result of being pulled out. Be sure to place your feet firmly on the ground and bend your knees while you do this. Like lifting heavy objects, this is the position you need to take.
It is important to keep your back straight to avoid straining the muscles in your back. By leaning back and extending your arms fully, you will be able to stand up by using your leg muscles. Your back should not be hurt by this method when it is done correctly.
Sledgehammer Method
It is necessary to have a lot more skill and strength to use some methods. One of my favorite Estwing mini-sleds and mallets is the Estwing Mini-Sledge. One of these practices is hitting the stake with a sledgehammer or mallet on all sides. The use of this strategy is not the best, despite being very common. For those who have never tried this before, I don’t recommend it.
Without proper preparation, you could suffer injuries. When using a mallet or sledgehammer, protective gear is required. Wear steel-toe boots with steel toes, gloves, and glasses. In case you miss or something flies in your eyes, you will not be injured by the personal protective equipment. Using the glasses will protect your eyes from severe damage caused by metal fragments entering your eyes.
You’ll need to be strong and have good hand-eye coordination in order to hit the stake in just the right way without hurting yourself. In order to hit the target accurately, you must be as precise as possible. When hit repeatedly with force, the stake will loosen and become easier to pull out. I don’t like this method because it damages the ground and leads to more injuries. Ideally, the stake should be removed with the least amount of soil and stake damage possible.
Also like this:
Final Thoughts
We have given a few methods of removing tent stakes above. There are some methods that are easy and some that require more effort. There was one puller in particular that was most impressive. When you choose a special puller for your camping spot on the mountainside, you would be wise to do so.
The sides of mountains contain hard ground, and removing tent stakes without a special tool may require a lot of effort. If your camping site is on normal ground, however, you may just remove the tent stakes manually or by using ropes. As we discussed above, both methods are viable options.
